Macbook A2442 No Power after battery dies or low battery.

Hello Guys
Sorry i don't have board number right now, but will update this in few hours when go back to store again.
Got a Macbook A2442 liquid damage. had a look on motherboard but didn't find any damage except touch ID not working any more. I cleaned it and it started working fine. Charged the battery full and left overnight to run, came next day it was dead.

unpluged the battery and connected again. started normally. no issue, everything works fine but again if battery dies or system shutdown when battery is low, it doesn't start and stuck at 5V untill i reset battery connection. tried new battery but no change in behaviour.



Any clue, where should i look for this problem?

Check if you have the correct charger for it.
It may require 96/140W, not 87W.

Yes, i bought a 96W charger and have a DC Power supply of 140W. it works well for few days if i reset battery connection and device come to life and start working and charging. but stop working randomly if i put lid down and can not wake up. no sign on charger light. stuck at 5v.
have to reset the battery connection again.

i haven't tried any software rest.

You may have problem with lid sensor.