For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
-124 is a problem of not seeing the sensor, which is usually and sm bus data line issue. check for corrosion around web cam connector, trackpad connector, etc. you may need to check for continuity on these lines as well.
This sounds like a fun one. i would check to see if they all share a power rail that is screwed up. then check in asd efi the hardware profiler for the incorrect readings and report them here. could be that because of the amount of water damage multiple sensors have different issues.
not sure if its the same thing but i just had same issue with a different sensor. I was told there is an issue with something in the line of smbus_smc_1 or the rail coming off pins 9 and 10 of u5511. looks like the go to r5261and r5261. check for short to ground and continuity as well as...
Does it still fail asd? and when you run asd EFI version check check hardware profile and post what the reading is. could be an issue on the data line.
have you checked voltage on R9678? usually when i see this there isn't voltage here and a reflow/reball needs to be done on the mux. Not this doesn't always fix the issue, but then again I'm not reading and flashing chips yet. if thats even possible on the mux chip.
Ok we can mark this as SOLVED. it was in fact and issue with pin5 on of j3502 being smashed over right in the bend of the leg. Never seen this on the web cam connector before, i've seen it on the lcd connector due to the lock.
Thanks again duke fawks and louis rossmann. SOLVED.
Good to know, and thanks a ton. i didn't notice any corrosion but i will do as instructed. I think these 820-3115 boards are gonna kill me. I've got a couple that do strange things and just have got to them yet.
i believe that it would put 5x on top of what ever zoom you are using in the microscope. Louis is the only one that i know for sure uses one. I haven't put one on my microscope due to me being the only one that does component level repair here.
i got this 820-3115. The fans come on high after about 5 seconds. ran ASD EFI and it fails for Ts0P. the reading is showing -124c.
i understand that this sensor is in the trackpad ribbon. I changed with known good trackpad and cable, but still the same issue. thought i would check j5800 for...