For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
ok after
I did a lot of research and testing I found the issue was that the programmer don’t make a good contact with the NAND just put on the NAND piece of paper and close the lid on it and it’s work perfect now
Thank you so much:)
I’m using with adapter BGA110, date is ok and I’m working on A2141 512gig and I’m removed nand from same model and capacity,
And I’m trying to make all of the nand with the same calculation
HI all,
So I bought also the p15 and it’s not working like it’s supposed to be,
it’s just read the nand and can’t write data to the nand all the time its show(nand repair failed) I tried different nands and still same issue, some know what is wrong with it?
thanks
Thank you very much
i test the correct value on good one
and the correct need to be 4.337k ohm and diode mode 0.434
L8260 as been removed:
pin 1-167.1 ohm / diode-0.163
pin 2-261.7k / diode-0.526
hello,
Macbook M1 Pro (82002100) came in with water damaged and completely dead
liquid around U8100
i put new one from older board and then the mac boot normal, but U8100 getting hot.
after several tests on coils find the L8260 have low resistance 166 ohms and diode mode 0.163
looks like m1...