Search results

  1. JorgePayar

    Pp5v_s3

    I had the same problem with this board I had no 5V_S3 and it was because of u7200 that was shorted. And as I can see you have the same problem, I would replace u7200 but wait for what Duke says
  2. JorgePayar

    smc stencil and reballing base

    I have found these: http://es.aliexpress.com/item/Free-s...08.8.33.vrnyJW http://es.aliexpress.com/item/Hot-se...08.8.73.yT8pYk but Im lost and I´ve never done this before can anyone help me choosing a good one for smc reballing?
  3. JorgePayar

    resistor goes from 1MΩ to 0.5MΩ??

    Cool!! Im learning so much in this forum!! Thanks for taking the time to reply Crizz.
  4. JorgePayar

    What are the most commonly used resistors?

    I´d like to know which ones are the most commonly used and buy some of them to have in stock
  5. JorgePayar

    Louis cats

    Hi, Louis I´ve seen that your cats are breaking your arm chair, walls, etc...Mine was doing it too, until I bought this scratcher. They will be happy and they won´t scratch other things but this scratcher Hope it helps
  6. JorgePayar

    resistor goes from 1MΩ to 0.5MΩ??

    Hi, I have replaced a 1MΩ resistor in a 820 2850 and I measure it before 1MΩ when I solder it 0.5MΩ The resistor is r6995 and I have the same issue with r6996 I didn´t apply too much heat so what can be?
  7. JorgePayar

    smc stencil and reballing base

    Hi, Where can I get smc stencils?I´ve been searching in aliexpress with no luck at all and the base to hold it. Can anybody put a link where to buy it? thanks
  8. JorgePayar

    820-2879 board, ppbus_g3hot 12.6v then goes down to 6 and get back again

    Ok check q7080 for corrosion, q7085 it appears to be fine but check it as well that is my bet :)
  9. JorgePayar

    [SOLVED]820-2936 start-stop loop three second intervals without any damage

    It would be so great Crizz I would enjoy so much if you do it. :) (diy threat)
  10. JorgePayar

    820-2879 board, ppbus_g3hot 12.6v then goes down to 6 and get back again

    I asked you a question before, do you have the same problem if you connect the battery? (battery alone and with charger as well) PS: still waiting for your resistance measurement about 820 2850 thanks
  11. JorgePayar

    Lead Toxicity - What Are the Physiologic Effects of Lead Exposure?

    I have found this weller study related to flux smoke effects...
  12. JorgePayar

    820-2879 board, ppbus_g3hot 12.6v then goes down to 6 and get back again

    Do you have the same problem if you connect it to the battery?
  13. JorgePayar

    How it is called or where can I get this connector?

    F*** I live in Spain :( but thanks anyway
  14. JorgePayar

    How it is called or where can I get this connector?

    4$??Could you post a link to it?thanks
  15. JorgePayar

    How it is called or where can I get this connector?

    I mean the male one I have a few microphone cables with that problem. Thank you Crizz for your prompt reply
  16. JorgePayar

    How it is called or where can I get this connector?

    The connector is from the mic, the cable and microphone are perfect but the connector is broken.
  17. JorgePayar

    Lead Toxicity - What Are the Physiologic Effects of Lead Exposure?

    A damn interesting article: http://www.atsdr.cdc.gov/csem/csem.asp?csem=7&po=10 Also: Lead poisoning symptoms in adults Although children are primarily at risk, lead poisoning is also dangerous for adults. Signs and symptoms in adults may include: High blood pressure Abdominal pain...
  18. JorgePayar

    Recomended tools by Louis,

    Did you try buying it from amazon.es or amazon.co.uk? I´ve been buying many things from amazon.co.uk and I live in Spain. I bought mine here: https://www.amazon.es/gp/product/B00...?ie=UTF8&psc=1 Boom+trinocular...
Top