Search results

No, ppbus_g3h is 12,5V What is at 16V is the F6905 fuse, and was fluctuating. Ok I have reflow U7000 and I soldered better (I think) also I replace R7052 that I thought it was bad but good in appearance. Now green light is on most of the times when I plug the charger in. I´ve been following...

r7021: 10,2 Ohms r7022: 10,2 Ohms R7051: 2,5 Ohms R7052: 0,003 Ohms I think they are good, can a cap be causing that?

Probably that one came from the toilet xD

Yep it is a fucking nightmare cleaning this shit, but health is better than money and totally worth it A solution for your problem could be a hose attached to the tap and use a plastic box for cleaning the machine, then you throw away the dirty water I recommend you to use one of this in your...

Ok thanks a lot

No Title I know you are busy...but...any help is welcome

No Title Im not a fan too on chunky smoothies :) I bought yesterday a juicer like this one: And what a difference, wow it is incredible,I recommend it Do you have one of this?, Ive never heard about the ninja The best one is the norwalk juicer but it is quite expensive...

Hi, I have another issue with the same board, now I have green light sometimes when I plug the AC charger, sometimes not and when it turns on then turns off. When I measure the f6905 sometimes I have 16,75V and sometimes only mV. The AC In adapter is working fine on several boards but not in...

Thanks aprendiz Gracias

Ok now it is charging and was because of the u7000 that was bad. You can close this thread and Im gonna open a new one because the same board have another issues. Thank you everybody for helping me with this. Duke= Now everything is stable in Voltage is not pulsing anymore I changed the U2600...

OK Following the rabbit hole I´ve found that there is a short over U5511 I think it i the U5511 itself, my question is can I desolder and check if is still the short plugin in the charger? or could it be dangerous?

Another thing that I have found is that the hoses must be made of EPDM rubber because of the high temperatures

I have found this mnaty http://www.amazon.com/Carbon-Filter-...0076624&sr=8-3 http://www.amazon.com/Pre-Filter-Hakko-HJ3100-5pk/dp/B005CKLJV2/ref=lp_8173840011_1_4?srs=8173840011&ie=UTF8&qid=1460076624&sr=8-4

that is a great idea

I ordered this one https://www.amazon.es/gp/product/B00XY4YD7K/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=AKQ7N59P73N5J It is 250cfm and is like 4 inches

Before: Sunflower Oil + Cotton After: Alcohol 99%

Ok I´ll check again over u2600 it was corroded it was because of that Do you think it could be anything else?

Yes Pin 4 q7950 also pulsating 5 seconds then the V drops PPVCORE_S0_CPU probe 1234 pulsating as well the V drops in 5 seconds like in L7260 Why is that?

Sorry a capacitance meter LOL sorry about my english Ok, so how do you know if a cap is fucked? continuity?

If so... which one do you recommend?