Search results

No, it reacts SMC reset. But not the caps lock. Also no External display.

No USB activity.

PPVIN_S0SW_LCDBKLT - 0V PP5V_G3S - 5.11 PP3V3_G3H - 3.31 CHGR_LX1 - 12.63 CPUGT_SW1 - 0 PVCCEDRAM_PHASE - 1.02 PVCCEDRAM_PHASE - 0 PPVCC_CPU_PH1 - 0.81 PPVCC_CPU_PH2 - 0.81 PPVCCSA_CPU_R - 1.02 PP0V95_S0_CPUVCCIO_REG_R - 0.95 P1V2_PHASE - 1.20 PP2V5_NAND_SSD0 - 2.52 None of then are cycling...

The PP2V5_NAND_SSD0, PP0V9_SSD0 and PP1V8_IO_SSD0are not cycling. I forgot to mention that I've tried Revive and it gone trough all the process with no errors. Is there any way to make sure the SSD is the problem.

Hi. I need help with this LB. Mac CPU gets mad hot while on battery, trackpad clicking. LB stand alone gets 20V and current draw varies between 0.05 ~ 0.1 amps and stabilize at 0.04amps. CPU gets hot just when battery is plugged in. Standalone it does not turn on. All the coils measurements are...

The display was working but intermittently and making me confuse. I replaced both hall sensors and problem fixed.

Hi, I need some help here, please. I have an iPad 11 (1st Gen) that came in for repair due to a “no power” problem. Upon inspection, I discovered corrosion and burned pins on the charging port. Many of the pins were damaged and shorted together. I replaced the CD3215 and 610A3B components. Now...

Yes, image is present. SMC_LID_LEFT/RIGHT signals missing.

Hi. This Mac came in for no power after is stays not touched for a year. The main issue was the battery, so after replace it and charge to 100% I left it discharging to test how long it would hold charge. But after 1 hour I came back to it and there was no backlight. For some reason the...

Just an update on this. I've replaced all CD3217 and everything is working. Thanks

Every 2 to 3 secs.

I got a donor board with the same model and replaced the USB-C controllers in the same position. One port was still stuck at 5V, and the other port was cycling at 20V. Upon further investigation, I found no connection between pin 12 on UF300 and CF300. Basically, UF300 wasn't getting...

Are these cd32 serialized, or I can replace than individually?

Magsafe works fine and charges the Mac. All 3 USB-C ports are not working. The readings from all 4 CD3217 matches a working board.

Help Please. This Mac came in with no display. After replacing the screen, it displayed for a few minutes and then stopped again. EDP_AUXCH_C_N - OL Is there a way to fix this? Thanks

I replaced the chip from M1 Pro and the board is from M2 pro. Maintaining the same position.

Here is the thermal image if the charger is connected to the 20V cycling port.

I did replace from a M1 pro board and now one port is getting 20V and cycling and the other one is still stuck on 5V.

Do you think that CD3217 from M1820-02020 is compatible with the M2 820-02773 board?

I got it from an M2 Air, not the same board. Not the same position.