Search results

I tested at Q7707 EDP_BKLT_EN = 0v BKLT_PLT_RST_L = 3.35v

Hi again, should I be testing the PP3V3 on the LCD connector to post voltages outlined in Louis' sticky post? Or or should I be testing PPHV_S0SW_LCDBKLT? Where is the best place to test the backlight voltage?

Awesome! Ok back to probing. Thx.

I'm an idiot. For some reason I had my probes connected to my multimeter wrong. Gotta get some fluke full proof gear. OK lesson learned.

Ok so I blew a perfectly good fuse, no prob I've replaced those before. Without changing the fuse I notice that Pin 1 of the Backlight fuse Reads 8v. Should I be getting12.6v?

Hi, don't know if you get notified of new posts so I just thought I'd ping ya.

Ok I just want to say that if you tell me once I won't make the same mistake again. I measured the fuse by putting red probe on power coming into fuse and black on ground and blew the fuse. Probably a noob mistake. I'll replace the fuse and move on. I have a basic understanding of measuring...

Perfect, New here so didn't know where to look. Of course there is a sticky on the subject. I'll start probing asap.

and I see this awesome video by Louis https://www.youtube.com/watch?v=ijpyNGOz6as that shows how to replace it but can someone tell me how exactly can I test it?

Ok now I have the board view and schematic. So I think I'm on the right path. I have another board here (same one) for parts and I'm hoping I can take the WLED driver off of it, if that is what the issue is. Any suggestions or comments are greatly appreciated.

Hi, I have been looking for a schematic for 802-00165-A and I'm not happy with the last place I bought from so can you suggest somewhere or is that not permitted here? Here is what I know: Minor liquid damage board looks great. -Powers on with no backlight but works with external monitor...