Search results

U1950 , no corrosion. Sorry, I proabaly measure pin 7 incorrectly before. 1 = 0 2 = 0.09 3 = 0 4 = GND 5,6,7,8 = 3.41V

ok, good to know for the fan. No caps lock, no USB activity PLT_RESET_L = 0.0V U1950 Pin 3 = 0 U1950 Pin 7 = 0 C1950 1 = 3.42 After 4 min, fan start to spin.

oh, I have 0.13. Could be SMC ? L7320 & L7310 = 1.86V F7710 (2) PP_BUSG3H = 12.60 L5001 - PP3V42_G3H = 3.41

Hi, A1502, no liquid, stop working suddenly. Yesterday, I've plugged magesafe, light ok, charging ok but not turning on, CPU warm and at some point fan was spining but nothin on screen, even with external light to check backlight issue.. no chemie. Today, I took board out, L7320&7310 are short...

I don't know how you know that but you were right (y)(y). I've changed it and now fan spin ! Thank you very much

no, I should ?

Thanks. It was C7376. Fan still not spin after replacement. I'll have to keep searching. R7006 = 1.04V now at PPBUS_G3H

L7310 = .18 L7320 = .18 L7360 = .144 those looks ok.

right... GND to GND... so Diode Mode, red probe on GND C7500 PIN1 = ohm resistance 0.000 ( i know you won't like it : ) L7139 = .112 L7520 = .112

Hello, Got this Macbook Air. Board is clean. When connected I get green and orange led, fan doesn't spin. SMC looks ok. I am suspecting C7500 but before removing anything i want to make sure. C7500 Pin1 = Diode mode = 0 C7500 Pin2 = Diode mode = 0 U 7501 23 = 0.0 V 22 = 0.00 V 12 = 3.4V 13...

Thanks. F7700 is good. without LCD D7701 Diode mode to ground. Pin1 =.389 Pin2 =.604 with LCD (almost same) Pin1 =.388 Pin2 =.604 XW7720 is a bridge or that's just a piece of copper, I don't get what component is it (pics attached.. there no component) pics of U7701, it looks ok to me.

Hi, I got this A1466, got drops of milk, was sill working for month and now stopped. I can see trace of yaourt neard LCD connector, on diode, bigcoil and the two caps. When connected to power, magsafe get green, then orange, fan start to spin for 3 seconds, I hear Chemie... and reboot, same...

I get 0 V. Where can I see it's a 0 ohm resistor, need another schematic?

I did more test and it's definitely better than before.

Thank you, was short. I don't see the value of that resistor. How can I know what resistor I can take to replace it ? btw I've read another poste to check if T2 is still ok, R6401 (PIN1) SPKRAMP_RESET_L, diode mode to GND =0.351, that mean T2 should be ok.

Hello, Ok, I've replaced all shorted cap. U6960 10, 11 & 12 = 12.29V 13 = 0V Thanks

Thank you for all your help. So I gave up and reassembled the Mac today. I did a little test before preparing the package. I see it's taking from 0.11 to 1.06 amp when I press the power button. So I tried to put it in DFU, that works. I tried "revive" but it failed with "the operation couldn't...

Sorry for the delay. Ok, NAND is fried. Can Macbook work with one NAND if I remove the faulty one ?

Thanks L3500 to GND = 0.442 L3500 to PPBUS_G3H = 0.468 L9580 to GND = 0.0 L9580 to PPBUS_G3H = 0.003 L9581 same as L9580

Thanks. One cap is shorted. I'll replace it.