Search results

Yes same, i have put another same and with the original broken same too

Hello, after oxydation of the trackpad and the keyboard control board, we replaced these two parts. Everything works except that the F1/F2/F3 keys, etc., don't correspond to the actions offered (volume control, brightness, etc.). We replaced the keyboard, the same thing, and did a DFU restore...

yes working in safe mode

hello i have replace screen for this model. After machine start in recovery and i have message need updating but impossible normally it's touch bar, i have replace with 3 touchbar and new original flex cable and same i have test fpc connector and see line DFR_TOUCH_INT_L to gnd on schematic i...

On website bios-fix.com

Same problem only logo apple and nothing

Same, dont have option when i press alt for select starting device Stuck on logo

No, i keep power button holding but not have option

No, when start i have message for restore support.apple.com/mac/restore

even if there is no disk?

i have machine start but stuck on apple logo - Drive and ssd remove - Programming new bios cleanME Each start stuck on logo apple and no command work, only reset pram

please, you have idea?

When i have error message, machine have logo apple with loading bar but no finish

i have this error

on ebay seller dfu never completed success, i have an error on dfu

hello i have buy 2x mainboard new (never open) model 820-02188-A When i start i have toothed wheel and after blue screen i have put in duf and start recovery after i have apple logo but an error when i restore it i have error message and never work have original box 639-11151 and mainboard...

overnight no visible liquid with apple diag we have CNW0020 error

hello i have mainboard 820-02841 without wireless logo we have test restore os same we have restore in dfu same sometimes i have logo but when we click no responding no short on line PP3V8_AON_WLBT / PP1V8_S2

hello please do you have the firmware for programmed efi chip thanks

hello, i have mainboard 820-01987 with no image no start i have check and no liquid damage, machine enter in DFU mode correctly. I have restore and same I have 20V and 0.6A without battery With thermal cam, see U8500 very hot. I have remove and check pins. On pin 1 and 3 i have short. I inject...