Search results

ignore it or replace the screen

https://www.youtube.com/watch?v=Fn1kehaYIYM&list=PLkVbIsAWN2lvK9wLg2pwcXJLut_-_P9G4 somewhere in there he tells you, its like 125ml per 4 gal or something like that

there is ssd --->pcie adapters, I havent seen any usb ones just the chinese rubbish, Ive bought one to test they are only $5

use an anti static feather duster, if you get fingerprints on the lcd you can use low stick tape and roll it gently on the lcd, it will lift prints and glass, as for the backlight I wouldnt want to touch it with anything

board repairs on the 3 and 4 maybe, def not the mini 1, they are like $100 on ebay

i pay 35 and charge 80, i make more from iphones, $60 profit per job, but i prefer macbook logic board repair, where i make 350-450 profit

..........

have a look at apples iphone 7 screen replacement charge, its all about cost of parts, for me ipad pro screens are $600 each and iphone 7 is $240, (AUD) these prices come down once the chinese start making copies, we cant compete with apple until there are copies. if you want to do ipads, you...

probably, anyway i use a carbon filter pad on top with a cotton filter on the bottom to catch stray carbon

i filter both my ultrasonic cleaning fluid and my alcohol

I dont get any residue, maybe try using a larger amount of alcohol, and filter it, i use a cheap broken ultrasonic cleaner just as a container for alcohol, its around 6 liters. after ultrasonic i put the board in the alcohol for 20 minutes or so and move it around, take it out hold it in front...

Sandpaper? Just scrape off the Solder mask with Tweezers or a knife

ground is ground dude, its all the same

the alcohol is to displace the water, its not worth the risk

power rails

dukefawks I didn't know that, thanks

have a look at the hall effect sensor for corrosion, that can cause messed up readings

i hope ur not using IPA in the ultrasonic cleaner, that will lead to a fucked up day, just buy 99% IPA off ebay, and as for cleaning fluid just look at the msds of branson and find whichever is closest where you are

asd fails, mux switching failed, didnt switch error, while switching to IG

I had this same problem, 3volt trace was dead, ran a jumper and worked, good work :)