Search results

3.38 s5_pwrgd 3.41 pm_dsw_pwrgd 3.33 pm_slp_sus_l 3.3 rtc_reset_l 5mV ppvout_g3_pch 3.3 ppvrtc_g3h 465mV sysclk_clk32k_rtc

U7930 pins: 1) 0V 2) 0V 3) 3.3V 4) jumping from 200-220mA 5) 0V 6) 3.3V

pp3v3_s5 is present pp3v3_sus is not.

Hi, I have a board with no power, Draws 16-17mA ppbus_g3h = 12.6V U7201: 3v3s5_en =3.4V pp5v_s5 = 5V p5vp3v3_vref2 = 2V 3v3s5_comp2 = 1.8V P3v3s5_VFB = 1.1V It seems all the 3.3 Rails are coming up short, am I right?

I literally only have the board, that's why I was asking. Thank you for the schematics.

Hi, I was to preface by saying I do not know how these newer boards work. I had a cap that blew and I replaced it on this board, I do not have the schematics so I can not say specifically. I have attached a picture of the cap though. Connecting this board to a USB-C meter it successfully goes...

That was the problem, thank you.

Hi again, I have an A1502 board that started at 26mA for a while, I was testing voltages and at some point, it jumped to 150mA I was originally missing PP5V_S4 on L7520 but then once it jumped to 150mA it was present. L7320 & L7310 seem a little low at 1.7V instead of 1.8V? U1950 there is no...

Thank you for the welcome. it really does not power on, I was using a dc power supply connected to a usb-c end with 20V going into it, then I removed it and hooked up 1V to the g3H line and it draws insignificant amperage 0.007A

Hello, USB-C meter does not power on, board appears bone dry CD3215 chips both produce 3.3V and no unusual heat under thermal camera injecting 1-8.6V into ppbus_g3h produces no amperage D6905 Measurements: 1) 500mA -> Slowly decreasing (PPBUS_G3H) 2) 100mV -> Stable please help me I'm...