pipsystems
New member
Hi, I was to preface by saying I do not know how these newer boards work.
I had a cap that blew and I replaced it on this board, I do not have the schematics so I can not say specifically. I have attached a picture of the cap though.
Connecting this board to a USB-C meter it successfully goes to 20V, drawing about 20mA -> to about 150mA for a second -> to 450-500mA for a brief moment -> 350mA for slightly longer then back to 20mA.
I do not know if is actually working properly, the cpu does turn on during the 450-500mA phase, I do not have a whole computer to properly test it.
Do you think it is functional?
I had a cap that blew and I replaced it on this board, I do not have the schematics so I can not say specifically. I have attached a picture of the cap though.
Connecting this board to a USB-C meter it successfully goes to 20V, drawing about 20mA -> to about 150mA for a second -> to 450-500mA for a brief moment -> 350mA for slightly longer then back to 20mA.
I do not know if is actually working properly, the cpu does turn on during the 450-500mA phase, I do not have a whole computer to properly test it.
Do you think it is functional?
