Search results

only charger PPBUS_G3H=8.58 3V42_G3H=3.42V POWER BUTTON IS GOOD

hello this board only turns on with the battery, when it has the battery and charger at the same time when pressing the power button it does not turn on

ok esta bien voy a medir, una pregunta el cristal Y1905, deberia siempre oscilar asi sea que no empieze a girar el ventilador( o sea antes del pulso del power)?

yes, vcore pulsing PLT_RESET_L a small pulse

not turn on, orange light PP3V42_G3H_REG=3.42 PPBUS_G3H=8.6 PP5V_S4RS3=oscilacion voltage PP3V3_S5_REG=3.3V todas las demas fuentes bobinas oscila voltage no hay corto en ninguna bobina no historia disponible modo bypass persiste problema

sorry for the question as a flash chip if it is not present on the board.I found a small corrosion near this chip, it may be that I need to change the chip?

muchas gracias .Y esos chip CD3217B12 en que casos tu los cambias, para este caso no aplica cierto.

listo gracias.Ya intente restaurar dfu varias veces y aparece mismo error.Esta medicion de valores PP2V5_NAND_SSD0=0V PP5V_G3S=0v Algo una cosa mas pueda hacer, o algo mas dañado antes de intentar 😟 programar U4770

hello, could you tell me to specify to check which name signal G3S and SSD to measure, :( sorry I don't have much experience in these boards

I get this error when trying to install

sorry, do you mean enter DFU only? or do I have to do something when I enter dfu, excuse my ignorance.at this moment I have it like this

yes already try dfu

excuse me usb c amp 5v 0.185A PPBUS_G3H=12.3v L7660=3.3v L6900/01=3.3v l7600=0v mode diode 0.423

pues SMC_LID siempre se queda en 0v con pantalla abierta y cerrada, como procedo

hola me podria colaborar como compruebo smc_lid, se hace con la pantalla conectada? el equipo se le va al backlight el equipo enciende hasta usuario,pero en ningun momento gira ventilador, mido en smc_lid_R en test point, con pantalla conectada y abierto y da 0v, no se si estara bien

the story is that a battery is placed in it, and after a week I return with the problem, all the voltages are in the coils except PPVCORE_S0_CPU_PH2=0v PPVCORE_S0_CPU_PH1=0v PPVCORE_S0_AXG_R=0v I already tried bios problem persists

modo diodo en bobinas donde no hay pulso tension l7520=0.004 l7510=0.004 L7550=0.003 l7560=0.003

lo siento me equivoque en la enumeracion bobinas :( L7030=12.56 L7260=3.3V L7220= el voltaje varia rapidamente subiendo de 0 hasta 5v y vuelve y cae nuevamente y vuelve otra vez a subir hasta 5v asi sucesivamente el ventilador gira pero se reinicia constantemente l7330=CICLO 0 to 1.5v...

yes, no backlight then the device shuts off after several seconds

BOARD HAVE USB DATA, THERE ARE VOLTAGE IN all big coils, but fan not turn on, there is image but without backlight for a moment.the display is good and also the fan, I already tried another one in good condition