(347) 552-2258 [email protected]

Search results

  1. Y

    820-01700 20v 0.03a

    before i check this..one side of both usb-c not working..
  2. Y

    820-01700 20v 0.03a

    no water damage. PPBUS 12.2V no voltage at SLPS2R or AWAKE
  3. Y

    820-01814 no backlight..

    BKLT_EN_R 3.3V BKLT_SD 12.5V i was try also with good know screen and cable PRAM didn't make the job
  4. Y

    820-01814 no backlight..

    ?
  5. Y

    820-01814 no backlight..

    no water damage.. 2 weeks ago there was short on PPBUS_G3H on C6406 and now suddenly there is no backlight.. PPVOUT_S0_LCDBKLT 0v i see the apple logo and the user interface but there is no backlight..
  6. Y

    820-01700 water damage 5v

    water damage in few areas, clean and replaced U7000 the mac was work for about a week and then back dead with 5v 0a dont see short, and also replaced U7000 again. PPBUS 5V dont have AWAKE/SLPS2R voltage and dont enter to DFU.
  7. Y

    820-01041 battery drain fast

    Already tried that..
  8. Y

    820-01041 battery drain fast

    Tray that..
  9. Y

    820-01041 battery drain fast

    did DFU still the same.. what else can i check? At the picture is before I start the YES command at Terminal and after.. https://ibb.co/M8sN1n3
  10. Y

    820-01041 battery drain fast

    I was connected to external screen, it’s the same, it’s getting hot just when the CPU start to work even little bit hard..
  11. Y

    820-01041 battery drain fast

    yes the same.. This is the picture of HW Monitor with just Terminal and YES command open. https://ibb.co/R37kgft
  12. Y

    820-01958 water damage 5v

    Still can’t..
  13. Y

    820-01041 battery drain fast

    Its the CPU temp goes high.. when i open Terminal and write the "yes" command its start to get hot and fans goes high
  14. Y

    820-01958 water damage 5v

    o.k, i was lift U3200 and U3100 and under both of the was corrosion! so i was clean and replaced(from donor board) now i get 20v but A puls from 0.03-0.00 and with battery is 20v a0.3-a0.0
  15. Y

    820-01958 water damage 5v

    u6500 area was with water damage.. PP5V_3GS 0v
  16. Y

    820-01958 water damage 5v

    no, water was just at the other side of the board(usb c erea)
  17. Y

    820-01041 battery drain fast

    just after its start to getting hot.. how do i switch? no, but you think it can drain the battery becouse of that? maybe it can down the temp 10-20deg but no to much....but i will check..
  18. Y

    820-01958 water damage 5v

    P1V8SSD_SW0 0V 100 P0V9SSD_SW0 0V 100 PP3V3_G3SSW_SNS 0V 170 cant enter DFU
  19. Y

    820-01041 battery drain fast

    I was put the board it good working body with original battery and it act the same.. fast fan and battery drain very fast! dont have error at Diagnostic mode. cant be bad CPU? what else can i check?
  20. Y

    820-01958 water damage 5v

    PP1V8_AWAKE -1.8V PVDDCPUAWAKE_FB_XW-0.7V PP1V1_ SLPS2R - 1.1V PP1V8_ SLPS2R - 1.8V
Top