Search results

on usb voltage tester it take 5v but if i flip usb c cable to other site on voltage tester black screen, only one side of usbc work and its whit two of usb at mainboard. g3h-0v. i change u700 but the same ampers going up and down 4-3A,

battery connected ppbus-11v whit and whitout charger 3v3-3.41v with whitout charger battery not conected ppbus- 0 whitout and whit charger 3v3 3,4 v whit charger, 0 whitout

ppbus-11v w/ and w/o charger 3v3-3.41v w/ w/o charger

macbook start whitout charger connected, just by pushing power button or trackpad it start. work on battery, connecting charger and black screen on tester, dont take any voltage but still work on battery. At the beggining it come to me whit flex gate i repair it but it stop working, on thermal...

no short on cc lines whit and whitout battery. When battery is not connected voltage tester work, stav at 5,12v .

?

?

?

i use 4 batteries, change cable too charger and battery connected: Q7065 1,2,3,5-11,3v 4-3,1v j6951 2,3-3,3v 7-0v on usb voltage tester nothing, black screen i will try to change J6950 i see its cracked a little, changed but the same

no water damage, at beggining dont switch on, termal show that one of cd32 getiing hot, chane it and it switch on but no charging. change 9239hi but the same.

i change u8500 and c8509 , try whit another lcd and the same, starting but no image

i know, but just tell you all what i notice. In this top case whit lcd, other mainboard work normaly

lcd connected, whitout u8500 diode mode 5v_s0sw_lcd - 501 whit u8500 5v_s0sw_lcd- going up to 1400 and above

trackpad responding. there is click

yes, try today again and the same

1,2 ohm

change it two times no effect, 5v_s0sw_lcd - 1443

i get to dfu or recovery but all time when revive or restore get problem - photo. i try all day many times. When instal system in dfu trackpad is working if its important,

u8500 1-5,09 2-3,37 3,4-5,09 5,6-0 7-0 u8501 1-3,3 2-3,3 3,4-3,3 5,6-3,3 7-0

at ppbus_aon