Search results

There are two unusual tempratures in HW monitor: Heatpipe incoming air 128C and Heatpipe Outgoing Air 128C. If i run ASD on the device it tells me that something with the SMC is wrong.(CODE: PFM006)

Our Costumer spilled some tea in his macbook. The touchbar was damaged, we replaced it. Now the second problem are the fans. They are spinning fast, and the macbook is super slow. There is no obvious corrosion on the board. I would guess its a sens line ? or could it be the replaced touchbar...

it had water damage on the keyboard and the trackpad, have swapped the usb C controller chipset, the lamp inside turns on but the laptop wont turn on, any ideas?

No history available really, gotta check voltages tomorrow. gonna reply when I have them.

Hi, have this touchbar board here which is not turning on. Seems like one of the USB-C controllers is dead, that denies the board to boot at all. At least getting 3.4V PP3v3_G3H on one side of the board, but 0 on the other... Just wanted to ask: are there any other signature failures for this...

Already tried booting in minimal mode, absolutely the same. I assumed it could be related to SMC/PCH somehow? Any thoughts on this?

Hey, I have this Touchbar Retina here, that wasn't turning on, customer said he spilled coffee onto the keyboard. Ran it through USC, now everything it does is start up - get (assuming) all rails, then turns off after about 10-20 seconds.The only signs of turning on are - spinning up fans and...

mac mini mid-2010 A1347. The problem is that, there is no picture on HDMI but on display port it works fine. Is this a known problem ?

Hey Guys, got a problem with a MacBook 15". I have replaced the LCD, but it doesn't work. External screen works fine, internal screen stays black.

Thats what I say, it doesn't make any Sense... but when the Battery is disconnected everything works fine, reconnect the battery charges the battery. Then disconnect the Magsafe and reconnect it there no charging activity. I will check the other voltages and give u a feedback.

Hi, the center pin Voltage is 3,4 when Battery is disconnected. Battery Connected Voltage is 0,2 on Center pin and 6,6V on + Pins.

Yes it was liquid, yes IO Board an Voltage ok.

Thx, the IO Board & Flat Cable are new, any other ideas?

the magsafe doesn't light up and doesn't charge the battery except if you disconnect the battery once, any ideas?

ASD EFI and OS pass without a problem, under heavy graphic stress test it works flawlessly, GMUX switching works fine, OS can switch the graphic without a crash but as soon as you open the photoshop the OS crashes instantly and the mac restarts, any ideas?

It`s a MacBook Air and we have no history for it.

Apple startup tone, black screen even with external monitor. where to start ?

After replacing 0084 with 005 there is picture, OS doesn't boot, ASD EFI finds no errors, is it even possible?

You were right, ASD finds no errors.

Here we had the GPU replaced a few months ago, it was working perfectly since then, now there is no picture anymore, we have replaced the GPU again with the same results, turns on, boot sound but no picture. operation system boots and you can hear sounds from the OS, any idea how can a board go...