Search results

Did you install the smc as zero? Did you get it from another motherboard?

Hello PLT_RESET_L : 3.3V CPU_VCCST_PWRGD : 1V CPU_VR_READY: 1V The green light is on. The fan is spinning. But it stays at 0.36 amps.

up800 area is liquid damaged. I removed CP810. But LUXE_C_VDD Line appears to be short-circuited. In this case, I need to replace UP800, right? There shouldn't be a short-circuit, right?

???

There is an article on repair.wiki that says ISL9240 is not available for purchase. Donor would be required. I bought the ISL9240 brand new. Isn't it possible? Does this have software on it? Or is this information wrong? So can I wear zero?

While the battery is plugged in, it constantly draws 0.450 amperes and then returns to 0 amperes. Constant 20v 0 amps when battery is not installed

now only 20v 0 amps

I replaced u7000. Currently, 20v draws 0.340 amps, after 10 seconds it goes to 0.0 amps, then again to 0.480 - 0.700, then to 0.0 amps again, it keeps turning like this.

Yes, I removed it and forgot to insert it to save the data. Now it works. Thank you very much for your support.

I changed the u7800. The device opened but the ssd disk is not visible. I looked in the disk utility and it is not there. Could this be related to the u7800? Where else should I look?

S5_PWRGD : 3.3v fixed r7802 : 100k good r7810: 4.7K good

PM_DSW_PWRGD 1 volt fixed PM_BATLOW_L 3.3v fixed PCH_SRTCRST_L : 3v fixed RTC_RESET_L: 3v fixed PM_RSMRST_L : No Voltage

I checked again, there is no change, 0 volts

PM_SLP_S5 no change 0 volts PM_SLP_S4 no change 0 volts PM_SLP_S3 no change 0 volts

I'm sorry, my meter's battery is dead. Yes, it drops to 0.3 volts when I trigger it. 3V3_SUS : 3.3v

There was no drop

The L7660 coil is connected to the PP3V3_S5 voltage, so I didn't mention the 3V3_S5 voltage as you requested L7660 : 3V VİNLDO3 : 13V LDO5V : 5V LDO3V : 3,4V VINLDO1_0 : no voltage PP3V3_PMICLDO : 3,4v Diyot modu: L9400 : 0,351 LB700 : 0,180 L7960 :0,059 L7900: 0,173 L8050 :0.162 L8000 :0.213...

L6900 :3.4v

only : L7030 : 8v

Thank you