Search results

STORAGE_LB_EN :3.3 volt SSD_RESET_LB_L: 3.3volt LPSR_EN_LB_L : 3.3volt

PP1V8_SSD_COLD : 1.8 Volt PP1V2_SSD_HOT: 1.2 Volt

a1706 does not see the disk, where do we start? disk utility doesn't show up either

hello, I can't find the board image. Do you have The device does not turn on. One of the coils connected to the tps51180 has 3v and the other has no voltage.

I cleared the u2800 zone and the device turned on. But it doesn't turn orange. The best known battery. the device continues to work after unplugging the charger

same in both cases PPBUS_G3H : 12.25 SCL: 0.510 SDA : 0,526 SCL: 3.4 Voltage SDA: 3.4 Voltage

PPBUS_G3H : witoutbattery 12.25v only wity battery 11.25 voltage 17/18 : 3.4 ohm 27/28 : 20.7 ohm

hi, I saw that the PP3V42_G3H line was short circuited. U7000 was short I changed it. There is now a green light but it does not turn orange and the battery is not charging. Device does not turn on PP3V42_G3H :3.4 v PPVRTC_G3H : 3.3 v PP5V_S5 : 5v PP5V_SUS : 5v

PLT_RESET_L 3.3v fixed PPVCC_S0_CPU_PH2 =1.8V PPVCC_S0_CPU_PH1 = 1.8V

smc bypass mode does not work device does not turn on at all 0.42 amps after connecting the charger

PM_PCH_PWROK = 3,4v PM_PCH_SYS_PWROK 3.4v CPU_VCCST_PWRGD = 1v

PPVRTC_G3_OUT = 3.3 v PP5V_S5_FET =5v PP5V_S3_REG = 5V PP3V3_S5_REG = 3.3V SMC_BC_ACOK = 3.3V

hello, i have green and orange light 820-4924-A no liquid damage, 0.42amps without battery

Hello wine has been poured before. q7660/80 zone cleared The device turns on, the fan spins at full speed. Extremely slow, battery not charging. Turns off when unplugging charger

When I check the cb309 in diode mode on another motherboard, it shows 0.502, but I can't get any value in the same part on this motherboard. Do I need to replace the UB300?

only ub300 does not turn off. and it outputs a constant 1.1 volts. PP1V1_UPC_TA_LDO_BMC others show 1.1 volts. but voltage comes and goes as it turns on and off

https://disk.yandex.com.tr/i/y0sNFS7Pgb2ePg I posted a video in this link

I said there is no short circuit CB408 was shorted. So could the UB400 be faulty? U3200 PP1V1_UPC_XB_LDO_BMC = 0.486 PP1V8_UPC_XB_LDOD = 0.459 PP1V8_UPC_XB_LDOA = 0.492 PP3V3_UPC_XB_LDO =0.509 U3100 PP3V3_UPC_XA_LDO =0.509 PP1V8_UPC_XA_LDOA =0.483 PP1V8_UPC_XA_LDOD =0.464 PP1V1_UPC_XA_LDO_BMC...

only 1 entry does not turn off. Restarts on other 3 entries https://disk.yandex.com.tr/i/y0sNFS7Pgb2ePg

No shorts except CB408. no field with low ohms