For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
so replaced u7100 and connected c7103 and r7147 since the test point was corroded, board does boot now but takes 300ma (20watts) that seems a bit high, it should be fine as long as it boots?
Diode mode on sda line was different than scleras, ultrasonic again was able to get me 8.4 on PPBUS, now an all_sys_pwrgd issue i think all_sys_pwrgd measures 0v. Q7950 has all 4 voltages present, and the 6 parent lines of the pgood signals supplied by 3v3_s0 are present, how would i go about...
This board was liquid damaged cleaned with ultrasonic. PPBUS_G3H is at 8.2v
3v4_g3h 3.4
smc reset 3.4
smc onoff 3.4
ppvrtc 3.4
Testing with good audio board and cable, any advice? thanks
I injected 2.5 volts at c7667 went up to 3 amps and nothing got warm, how many amps would be safe to go up to, i am checking with a thermal camera, any recommendations or should i try with more amps
Hi, i have a Macbook pro Touch Bar that has no power, no sign of liquid damage, 3 of the 4 usb c ports are working and take 20v at 0.04amps the last usb c doesn't take any power.
PPBUS_g3h is 13v
pp5v_s5 is 5v
3v3_g3h is 3.4v
3v3_s5 is 0v with 0ohms to ground 3v3_sus is not present
do i...
I have an A1419 iMac with a locked bios, can you remove the password for me https://drive.google.com/file/d/1azojaiKOOr19mvJUY3KlmNYpksEASTgR/view?usp=sharing
i have a 2015 A1502 screen thats stuck at max brightness bklt pwm is changing on the board as i lower and raise the brightness i tried changing the lvds cable and same thing has this happend with anyone or is this just a bad screen
I have a 820-00165 originally w.d. It would chime then a black screen would appear for around 15 seconds boot is slow and got stuck booting tried cleaning ME no change tried new bios and it was fine after pram reset but currently doesn't have the correct s/n was wondering if you could help me...
Nothing from diagnostics
Copied over original bios ME and reporgrammed
Do i look for a bios i have that works and clean me the same way and program onto this one or should a file from the forum work and clean me on that
i have a 820-00165 board liquid damage originally no backlight replaced lcd connector was in bad shape backlight works didnt boot into mac os got stuck around half way. Tried clean me bios same thing boots into windows smc bypass no change safe mode dosent boot into mac os.
Could this still be...
I have a 820-3437-B that has 1.7v on Vcore u6100 is missing spi_mlb_clk when u6100 is off the board i get that signal all spi resistors look good no shorts found on chip lines