Search results

For the last three months i've benen paying double for The subcription. I want refound but I cant get in contact with Louis. What can I do?

Need help to fix this For some reason I have paid twice for monthly subscription for three months. I would like to have a refound. Please help me.

Got this old but nice lookin board with no backlight. Found a corroded via, BKL_ISEN2, and the pad is gone next to L9701 but on the other side it look good. Is it possible to fix this? I don?t really understand via but I suppose they connect to traces inside the board.

When off, pin 9 is 0,5v and pin 15 is 0 ppbus_g3h is 12,49

Need to sleep... I?ll check tomorrow. Thanks for your help

Pin 15 0,053v pin 9 0,66-0,69 pulsing up and down at fuse with only battery it?s pulsing between 11,67-11,74

?It works perfect without battery?

I?m 90% sure the problem is on the logicboard. But I dont Know exactly how the battery circuit works.

Yes, fan speed is high in boot menu. Asd efi and asd os show no errors. It works perfect without battery.

This One almost work now. It boots from battery. The problem is that the fan starts spinning before login screen. And after a few minutes the coursor is hacking and everything feels slow. When i run it without the battery its all good. I have tried different trackpads, bil-connectors and...

Ok, usally? What else?

Resistance to ground on pp3v42_g3h is 0.993 k. I think that is to low.

L7260 is 0.450 in diode mode, same as other boards. Pin 5 and 8 on Q4690 have 3,3 volt. Same as working board.

Owners daughter inserted a 3.5mm charger in the headphone port with the other end connected to a usb port. Computer died! It has green light, pp3v42_g3h and ppbus_g3h. What do i check?

For some reason I don't have a green light anymore

R7020 = 16.5 volt with only AC There are traces of spill on multiple places but nothing is really corroded. Top half of the board look worse than the other half. U7000 pin 27,28 is 20,6 ohm pin 17,18 is 3.5 ohm

Ok, thanks

Did you have any luck with this? I have the same problem

I got this machine in perfect condition. It did boot to OS a coupel of times but now it stops when the bar is filled 2/3. Same when I boot from a harddrive connected to USB. Tried other ATA cables, HD and memory but still the same problem.