Search results

Excellent. Thank you for your reply!

Hi Guys, sorry if its an off-topic but i cant seem to find online whether A1707 2016 motherboard is compatible with 2017 model? There is no better place on Earth to ask this question ;) Thanks!

Hi, Has anyone done a keyboard replacement on MacBook Pro 13" 2020 A2289? Can it be replaced separately? Is it tricky? How difficult is it? A1706 difficult or as simple as A1278? Thanks!

Not yet but I was thinking about it and hoping that maybe there is another solution. For DFU restore do I need the same A1932 model or A1708 and A1707 will do too?

Hi, I have an A1932 machine here that does not boot to OS. Recovery gives an error: 1008F and external boot is locked. What is my best solution? Thank you for your help!

No. First time I injected it at J6900. Now I tried to inject it directly at 12V_G3H and I got green light on the first diagnostics led. I went poking around for more short and found another one on PP12V_S0 line. Tried to inject 12V there but it only takes 1V since its shorted to ground. Nothing...

295? i need to sleep on it :D

I injected 12V and the results are almost the same. I get 1.5V on the connector and 1amp.

497 with power supply connected 624 without

Sorry did not understand you. BIOS you mean U6100? That one I need to read with the flasher tool and flash it to another bios chip, right? I can not simply replace it from another board. CMS I have taken from the same board. Thanks!

It is 12V on the output cable of power supply. When I plug it in to the board, it becomes 0.41V on J6900.

PLT_RESET_L is 3.35V cleaned J6100. Checked all SPI Series Termination resistors and traces. Replaced U5000. PLT_RESET_L still 3.35V. When I connect USB mouse I get a blink.

497 in diode mode

Checked voltage on pins 4,5,6, 10,11,12 - 0V Checked for short - shorted Replaced Q8450 (12V_S0) FET - no short voltage on pins 4,5,6, 10,11,12 is 0.45V now. Please advise.

Hi there, This board was water damaged. Has been to another shop already. They cleaned the board so cant original areas of corrosion. I have orange light on MG. Normal fan spin. No light on caps key or USB mouse. No chime, no image. I took some measurement but now I am stuck and dont know...

Hi, Tried good working power supply - no light on any diagnostics LEDs. Inspected board for corrosion or explosions - nothing. Seems like there are no schematics for this board either. Any known issues with this board? Any idea what it can be? Thanks!

Yes, when headphones not detected there is still sound on internal speakers. Looks like its a big pain in the ass. I will figure out another solution for this client. Thanks for your help!

Sorry if I was confusing. "Headphones detected after close/open lid." - In OS I plug in headphones and they are NOT detected. I close and open lid and they are suddenly detected. All e transistors react when I plug in headphones. Q6800 pin 3 voltage drop from 2.37V to 0V Q6801 pin 3 voltage drop...

Unplugged Q6801-03 - 4.3V Plugged-in - 0V Headphones detected after close/open lid.

Cleaned and replaced port - same problem.