820-000281 - Need Touch Bar connector

Sykulski

Member
Hi. I don't have a donor board and can't seem to find any online anywhere. But I need the connector for connecting the Touch Bar display to MLB. Anybody know where to find either a donor board or the connector itself ?? Preferably a donor so I could beep my way to where to bridge the burned pins as I also cannot find schematics for this shit...

Thanks
 

Attachments

  • photo1522.png
    photo1522.png
    523 KB · Views: 0
  • photo1523.png
    photo1523.png
    4.1 MB · Views: 0

dukefawks

Administrator
I'm pretty sure they are the same as iPad Air 2 rear camera connector. I guess you need the matching connector on the flat cable too as that will be fried too.
 

Sykulski

Member
No Title

Thanks. The rear camera connector from an iPad Air fits :)

But where does the burned pin go ?
 

Attachments

  • photo1526.png
    photo1526.png
    4 MB · Views: 0

dukefawks

Administrator
Look at 820-00239 diagram, it goes to R5630. So you need to find the current sense resistor for this line.
 

Sykulski

Member
I already beeped me through to the other side of the board via the via and the computer is now working

Thanks Duke. Words cannot explain how much i love you :)
 
Top