820-00045 no post

[ALB-Repairs]

820-00045 here that apparently was freezing then went no post it has no liquid damage, it seems to have all power rails. But one thing throwing me off is that the SYS_DETECT LED is not lighting up, despite getting the correct power to it.

Anyone get any ideas?

 

[dukefawks]

If it was freezing before dying then it is probably a cracked trace or bad RAM. The LED could just be bad. This board smells like rabbit hole...

 

[ALB-Repairs]

If it was freezing before dying then it is probably a cracked trace or bad RAM. The LED could just be bad. This board smells like rabbit hole...

good thought on the RAM, wonder if when these have bad ram they beep like the others, im yet to have seen it.

The LED should be bad as when i check it with diode mode it lights up correctly.