Palhano
Member
Clean logic board, without oxidation. When I connect the power supply, it turns on, runs the cooler for about 7 seconds and restarts.
During testing, it turned on normally. I assembled it all and when the system started, it froze and the screen was all streaked, it didn't turn on again.
I tried SMC bypass, clean BIOS file, changed the BIOS chip, without success.
When turned on, I have all the voltages on the S0 line. PLT_RESET 3.3. I removed the Q8150 to test, it didn't work either.
During testing, it turned on normally. I assembled it all and when the system started, it froze and the screen was all streaked, it didn't turn on again.
I tried SMC bypass, clean BIOS file, changed the BIOS chip, without success.
When turned on, I have all the voltages on the S0 line. PLT_RESET 3.3. I removed the Q8150 to test, it didn't work either.
