All looks good.
PLT_RESET_L comes high?
PLT_RESET_L comes high?
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-00165 No Boot
- Thread starter Instafixx
- Start date
Try known good BIOS.
Be sure all SPI Bus Series Termination resistors are good; check their traces too.
Clean J6100 if dirty; remove if is very bad.
Be sure all SPI Bus Series Termination resistors are good; check their traces too.
Clean J6100 if dirty; remove if is very bad.
If you plan to stay in business with MacBooks repair, get Medusa 3; with several adapters.
You can also use a classic USB programmer, as cheap as CH341A.
In such case, you need to remove the SPI chip (U6100).
CMIzapper Medusa-3
www.cmizapper.com
You can also use a classic USB programmer, as cheap as CH341A.
In such case, you need to remove the SPI chip (U6100).