820-00165 - No Green Light

[menatwork]

No liquid damage, just stop work.

• PPBUS_G3H = 8V
• PP3V42_G3H = 3.4V
• PPVRTC_G3H = 3.4V
• PP5V_S5 = 0V
• PM_SLP_S4_L = 0V
• SYS_ONEWIRE = 3.4V
• 3V3_SUS = 0V
• U7501 PIN 4 = 0v
• U7501 PIN 23 = 8V
• PM_SLP_S5_L = 0V
• PM_SLP_S4_L = 0V
• SMC_ONOFF_L = 3.4V
• PM_BATLOW_L = 0.4V
• C7524 = OK
• R7545 = OK
• SMC_ONOFF_L Trigger = Nothing happen

Any Idea?

 

[2informaticos]

"PPBUS_G3H = 8V"
I bet for 8.2V; post exact value next time!

"PM_BATLOW_L = 0.4V"
The board cannot start.
Be sure to have correct charger.

First of all, SMC_RESET_L?

 

[menatwork]

U5110 PIN 5 Smc_reset_l = 3.37v
PIN 1 = 3.4
PIN 4 = 2.7V

PCH_INTRUDER_L = 3.1V
INTVRMEN = 3.3V

ppbus_g3h = 8.17v

 

[2informaticos]

No communication between SMC and ISL6259.
Post voltage and diode mode to ground on SCL/SDA lines of battery bus.
Also try known good LIO board/flex.