ytesfay80
Member
This board had a small amount of liquid damage by the touchid/power button flex cable and the battery connector on the logic board was broken causing the machine to not charge. I replaced that power button flex cable and the J6951 battery connector. The machine was working perfectly fine a few hours ago and I was able to login with no issues. I didn't do anything besides put the machine into an incase before I went to drop off the machine then after turning it on the keyboard is no longer registering on the login page. I can tell the keyboard is partially working though because if I hit the caps lock button the green light comes on and the login screen lets me know caps lock is on. If I hit the spacebar button I see something flash in the upper right corner.
The trackpad works fine and I tried plugging in an external keyboard but that didn't work either.
I've never seen anything like this and I'm not sure where I should even start to measure.
The trackpad works fine and I tried plugging in an external keyboard but that didn't work either.
I've never seen anything like this and I'm not sure where I should even start to measure.