820-01521 water damaged

[yobad]

Hello,
I have 820-01521 water damaged, one USB-C port have 5v 0.3a-0.5a
The other one 5v0 0a
How i could start the diagnostic in this case.
Thanks for your help.

 

[2informaticos]

Compare diode mode readings between CD3215 chips; even better if have a good board for comparison.

 

[yobad]

I Found PP1V8_SLPS2R Shorted with 6.7 when i tried to connect the charger voltage in this line was unstable between 0 and max value was 0.6 V also PP1V1_SLPDDR_SOC was shorted too was 0.3, can it be the T2 chip? and is there anyway i can fix this issue?

 

[2informaticos]

"I Found PP1V8_SLPS2R Shorted with 6.7"
What means 6.7?
Post exact ohm value to ground, not diode mode.

 

[yobad]

sorry it's 6.7 ohm
so pp1v1_SLPDDR_SOC 0.3 ohm

 

[2informaticos]

These are really bad values.
You can try to inject 1V to PP1v1_SLPDDR_SOC .
If T2 heats, the board is good for scrap...