820-01598 no wifi

grmacs

Member
No history on this. Board was clean. A2159 820-01598 that has no wifi for no known/visible reasons. 1.8V and 3v3 are present so I believed it was the wifi chip itself. I tried reballing it but no change. I tried pulling same part number wifi chip from other board with associated ROM chips and no change. I then ordered a A2159 donor board to see if it was related to prior attempt being from a different model. Pulled Wifi and WLAN and BT roms from 01598 donor and no change. I tried restoring from DFU to see if maybe T2 needed reflash and no change.

Broken trace wouldn't make sense to me. I'm thinking there's a weak link. Suggestions?
 

2informaticos

Administrator
Staff member
U3701 controls both wifi and bluetooth.
Bluetooth works correctly?
No wifi hardware detected at all on System Information?
 

grmacs

Member
No bluetooth or Wifi hardware detected in system info. It shows software versions only for wifi.

So, I had tried pulling U3701, U3710, U3750 from another 01598 board and I believe it went pretty well as far as reballing the donor U3701 and placing. I thought that would've resolved any issues or at least after T2 restore but nada.
 
Last edited:

2informaticos

Administrator
Staff member
Apart of power rails (1V8/3V3_G3S_WLANBT), check all resistors from page 32.
Few caps to check on the PCIE data lines too.
 

grmacs

Member
Going to be a no fix. All I can guess is maybe T2 issue. Connectivity on U3701 seemed pretty good and couldn't find any issues with the caps or resistors around it. Inspected the board again and just not seeing anything out of place.
 
Top