820-01700-A u9020 getting very hot, no boot.

Soji

Member
PPBUS shorted
I cleared it.
now I saw a little hole on the nand ic
The nand ic is getting very hot.
pls can it be replace or I need to do some sought golf programming. Thanks
 

2informaticos

Administrator
Staff member
There are videos on Internet about changing NANDs.

You will need to pick the chip from donor board, same position.
We don't have yet positive feedback left on the forum about this.
 

Soji

Member
So it not possible to replace it? Since there is no positive feedback. Just wanted to know possible or not.
I tried to fix two nand chip of same board
After dfu. I got the operation….(Amrestore….error 6- failed to …. And it’s same board same side but not precise about the position. Should I give it another try or it’s not possible
 
Last edited:

Soji

Member
So it not possible to replace it? Since there is no positive feedback. Just wanted to know possible or not.
I tried to fix two nand chip of same board
After dfu. I got the operation….(Amrestore….error 6- failed to …. And it’s same board same side but not precise about the position. Should I give it another try or it’s not possible
 
Top