820-01700 boosts to 20V after repair but wont boot

[No-Clean]

Clean board had both U2890 and UB090 bad, also short on U2800 as well as U3200 and U3100, total mess, came in with 5V, now it makes it to 20V but wont charge or restore.
All Awake and SLPS2R signals present, following boot sequence it makes it all the way to PMU_COLD_RESET_L and missing voltages start at PMU_PVDDMAIN_EN

 

[2informaticos]

Test if boots with a battery holding some charge.

 

[No-Clean]

No power with charged battery, stays at 20V 0A

 

[2informaticos]

Switch to 20V without battery connected?
Tested with original 96/140W charger?

 

[No-Clean]

Yes, I get 20V without battery, all test are done with OG 96W charger

 

[2informaticos]

Tried DFU?

 

[No-Clean]

Yes, I tried but does not enter DFU

 

[2informaticos]

What about G3S and SSD voltages?

 

[No-Clean]

Found a problem on G3S fixed it then found another issue, this board has multiple problems and no longer is worth the time to fix, thanks for your help!