20V 2A
The Mac was working perfectly before. After the display replacement, the camera stopped working.
I opened the Mac, disconnected and reconnected the camera, and since then the machine appears to power on, but it doesn’t actually boot.
The fans spin, but there’s no startup chime and no keyboard response. The trackpad does respond.
A DFU Revive completes successfully without any errors, but the behavior remains the same.
I couldn’t find any shorts on the board. U1200 gets warm, but I haven’t found any shorts around it or on anything directly related to it.
The Mac was working perfectly before. After the display replacement, the camera stopped working.
I opened the Mac, disconnected and reconnected the camera, and since then the machine appears to power on, but it doesn’t actually boot.
The fans spin, but there’s no startup chime and no keyboard response. The trackpad does respond.
A DFU Revive completes successfully without any errors, but the behavior remains the same.
I couldn’t find any shorts on the board. U1200 gets warm, but I haven’t found any shorts around it or on anything directly related to it.