Cant find any liquid damage.
Have 20V on charger it charge the battery.
At the beginning after power button press there was no chime and after 2-3 minutes there was short max fan spin and the same issue in loop.
Entered in DFU, tried restore and had error 10.
PP2V5_NAND_SSD0/1 have correct diode mode values.
Big coils resistance to ground in Ohms:
L7211/21/31 1.7 Ohm is not too low?
L7410/20 0.4 Ohm
Whats the safest way? Lift coil and then check?
Have 20V on charger it charge the battery.
At the beginning after power button press there was no chime and after 2-3 minutes there was short max fan spin and the same issue in loop.
Entered in DFU, tried restore and had error 10.
PP2V5_NAND_SSD0/1 have correct diode mode values.
Big coils resistance to ground in Ohms:
L7211/21/31 1.7 Ohm is not too low?
L7410/20 0.4 Ohm
Whats the safest way? Lift coil and then check?