Soji
Member
I have another A1990 pulling . 20v 0.0a going up to 0.08 0.056 0.079 0.089 then 1.03 then back to 0.80 then 0.00a.
Non of the ssd voltages is available
They are all reading milli voltages
2v5_nand_ssd0 is shorted to Ground
I cleared the shot.. but is not still coming up. With battery it’s drawing up to 3.15a
But without battery it’s drawing. 0.00,.0.05,0.07 back to 0.00
Pls what can I do
ppbus_g3h Is present stable 12.9
All ssd voltages are available now.
Non of the ssd voltages is available
They are all reading milli voltages
2v5_nand_ssd0 is shorted to Ground
I cleared the shot.. but is not still coming up. With battery it’s drawing up to 3.15a
But without battery it’s drawing. 0.00,.0.05,0.07 back to 0.00
Pls what can I do
ppbus_g3h Is present stable 12.9
All ssd voltages are available now.
