820-02020 M1

iremont

Member
Where to start, comp working tryed different housing, trackpad and battery, still same, there may be issue with fan. And fan after turn on full speed
 

2informaticos

Administrator
Staff member
Run HWMonitor and check for strange values.
Check all components around UE501, QE500 and JE501.
Compare diode mode readings with good board.

Any history available?
Just in case, try DFU and full reinstall.
 

iremont

Member
Everything is clean around ue501, qe500, je501. was water spill. around the backlight area and speaker amplifer area.
 

2informaticos

Administrator
Staff member
Do all previous mentioned tests.

Tried with external monitor disconnecting internal LCD?
Also test disconnecting JR900.
 

2informaticos

Administrator
Staff member
Did you check the temps with HWMonitor?

Test the board in other shell; fan itself may be affected by corrosion.
 
Top