I have an 820-02020 which had liquid damage around the touchbar connector JT700 - I've replace this and also order a new touchbar due to the flex connector being corroded. Before taking the damage TB off I thought I would try using both my test rig (not sure if the TB works on it) and also on a brand new one. Both are doing weird things. To best describe what is happening I done a short video which can be viewed here:
I've checked the JT700 (which seems to be the touchscreen connector of the touchbar) using diode mode and they all seems to give a value which Is the same as my donor board. I can't test the voltages as they are located underneath the logicboard and it won't show a display on an external screen (not sure if the M1 work without the screen connected)
I've also swopped screens for a brand new one and it's doing the same thing.
Can anyone shed some light on this?
I've checked the JT700 (which seems to be the touchscreen connector of the touchbar) using diode mode and they all seems to give a value which Is the same as my donor board. I can't test the voltages as they are located underneath the logicboard and it won't show a display on an external screen (not sure if the M1 work without the screen connected)
I've also swopped screens for a brand new one and it's doing the same thing.
Can anyone shed some light on this?
