drmacbookth
Member
1. What too to use to reprogram SOC ROM U2010?
2. How to force DFU by jumper method?
Thanks for any tips!
2. How to force DFU by jumper method?
Thanks for any tips!
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
820-02100 A2485 question DFU and ROM programming
- Thread starter drmacbookth
- Start date
Do you mean what programmer, or bin file?
On previous T2 machines, worked with empty bin; you can try with M1 too.
Anyway, make backup first!
I recommend to solder a switch over the force DFU pads on MLB (SV100).
Use 5-10cm wires and is more convenient that a simle wire jumper, which need to be cutted off.
On previous T2 machines, worked with empty bin; you can try with M1 too.
Anyway, make backup first!
I recommend to solder a switch over the force DFU pads on MLB (SV100).
Use 5-10cm wires and is more convenient that a simle wire jumper, which need to be cutted off.