820-02757 that had liquid damage on touch ID 16v booster.
UT600, CT610 and LT601 were corroded and are now replaced. Still touch ID is not receiving 1.8v
I get this readings on R2210 with the board disconnected (touch id connected/disconnected makes no difference):
PP1V25_S2 = 1.25v
TOUCHID_PWR_EN = 0v
Bad Touch ID sensor (it looks fine and also does the connector) or bad SOC?
UT600, CT610 and LT601 were corroded and are now replaced. Still touch ID is not receiving 1.8v
I get this readings on R2210 with the board disconnected (touch id connected/disconnected makes no difference):
PP1V25_S2 = 1.25v
TOUCHID_PWR_EN = 0v
Bad Touch ID sensor (it looks fine and also does the connector) or bad SOC?