rob777
Member
820-2396 has green light. Seemed to of charged a dead battery. Zero evidence of liquid damage. Won't turn on.
Ppbus g3h is 12.4v
smc_reset_l is high at 3.4v
im guessing this is why we are not turning on. I tried shorting it to ground as I assume that would be like doing an smc reset but no change in anything.
Figure I have to figure out smc_reset_l before going any further.
Is it more likely a faulty smc causing this high reading or U5010 which as far as I can tell is working as it should.
Thanks.
Ppbus g3h is 12.4v
smc_reset_l is high at 3.4v
im guessing this is why we are not turning on. I tried shorting it to ground as I assume that would be like doing an smc reset but no change in anything.
Figure I have to figure out smc_reset_l before going any further.
Is it more likely a faulty smc causing this high reading or U5010 which as far as I can tell is working as it should.
Thanks.