iambehr
Member
Hello,
Macbook had corrosion on or near internal dp connector and J4700. Cleaned up pins of J4700. Replaced edp connector with a new part. Macbook boots and shows external display, all seems to be working except for internal display.
Is not a backlight issue, checked for image and tested with known good display.
Checked smc_lid, 3.4 volts and voltage drops when magnet is applied to the lid switch.
Any thoughts?
Thanks!
Macbook had corrosion on or near internal dp connector and J4700. Cleaned up pins of J4700. Replaced edp connector with a new part. Macbook boots and shows external display, all seems to be working except for internal display.
Is not a backlight issue, checked for image and tested with known good display.
Checked smc_lid, 3.4 volts and voltage drops when magnet is applied to the lid switch.
Any thoughts?
Thanks!