820-2879 kernel panic

[Gmorb]

board powers on and will only boot using a disc version of snow leopard and will then freeze on bootup after installing update. i also noticed some kernel panics is this issue solvable without doing any gpu replacements?

i saw a video louis made on how he fixed it but this was for the 15 inch. does the same issue apply to 13 inch models?

 

[dukefawks]

Must use PC8500 RAM. Other common one is the tape on the airport connector is missing and the conducive foam thing on the cable is shorting out the connector pins.

 

[Gmorb]

after installing 8500 ram it works no more freezing but now hard drive is not detected. will do further testing.

update:fl4501 was knocked off hdd being detected now

 

[dukefawks]

The usual bad HDD cable.