For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.
if i pull out F7040/41 then i get only a short time green light. then i have to wait a little to connect again for a short green light.
to be shure i replaced again u7000 but no change
there is still something not ok in the 3.41 or one wire circuit i think....
without F7040/41 should be minimum 3.41V stable
after plug in magsafe green light is coming up, 3.41V is coming up as well. it stays a few seconds and then no green light, no 3.41V
of course, no 3.41V no green light. could it be that the same process only quicker is going on when inserted F7040/41 ? and thats the reason for the flickering somehow ?
1. I replaced U6990, no change
2. I removed L6995 and injected 3.41V on Pin 2 from L6995
SMC_RESET_L and PP3V3_S5_AVREF_SMC is stable
but result is still the same. WTF can that be. Should be easy....
found still that PP3V3_S5_ISNS_R is not stable but VREG 3(over C7203) are stable, VREG5 not (over C7205) is that important or not in this state?