820-3115 B- liquid damage-No Boot---Nothing

[luk812]

screen of LCD connector.
replace F9700 fuse... cable be fried that's sure....
LVDS connector pin 3&4 short to ground......

 

[luk812]

L9008 is dead, and PP3V3_S0 is short to ground???? an idea?

 

[luk812]

Pp3v3_s0 ........

 

[dukefawks]

As I said your connector is fried, replace it.

 

[luk812]

L9008 and C9010 were removed, and now Pin 3&4 of LCD connector are not anymore short to ground.....

 

[luk812]

ok you are right 2 pins are fried.......

 

[luk812]

Do you think that's I replace lcd conector by new? (this connector comes from a donor board...)

 

[dukefawks]

What do you want me to say? The board needs a LCD connector new or donor.....

 

[luk812]

I removed the LCD connector fried, and I weld another LCD connector.
Now I ask you if according to the new pictures you see, it would be better to weld a new one, that's all ...

 

[dukefawks]

I have no idea, why don't you try and plug in an LCD? Not a fried LCD cable of course or the connector fries again.

 

[luk812]

all right......

 

[luk812]

Little problem about SMC, I have desoldering SMC and PIN 125 (NC_SMC_GFX_OVERTEMP) was abscent......
what would be the consequences?