ALB-Repairs
Member
This ones stumping me. We have PM_SLP_S5_L
We have PM_RSMRST and all other chipset support stuff like SUS voltages.
I have tried a new Bios Chip. The board looks very clean and maybe not liquid damaged.
PM_SLP_S4_L has 36k to ground so it doesn't seem like theres a short on the line.
Ive checked all inductors to ground, only one looking low is l7630 being 1.6Ohm
The board pulls 0.56A from the supply, the usual S5 state is around 0.32A, but this minute difference doesn't give much away.
Any ideas would be appreciated.
Thanks
We have PM_RSMRST and all other chipset support stuff like SUS voltages.
I have tried a new Bios Chip. The board looks very clean and maybe not liquid damaged.
PM_SLP_S4_L has 36k to ground so it doesn't seem like theres a short on the line.
Ive checked all inductors to ground, only one looking low is l7630 being 1.6Ohm
The board pulls 0.56A from the supply, the usual S5 state is around 0.32A, but this minute difference doesn't give much away.
Any ideas would be appreciated.
Thanks