Check all SPI Bus Series Termination resistors and their traces.
Inspect J6100 for corrosion.
Check if all voltages from pages 11 & 56 are present.
Possibly accumulated crap underneath PCH/CPU.
You may try heating with quality flux.
BTW, this board restarts 3 times as normal behavior.
Fan goes high, if trackpad is not connected.
Inspect J6100 for corrosion.
Check if all voltages from pages 11 & 56 are present.
Possibly accumulated crap underneath PCH/CPU.
You may try heating with quality flux.
BTW, this board restarts 3 times as normal behavior.
Fan goes high, if trackpad is not connected.