george-a
Member
hi guys,
so after UC this one it came back to life but:
1) the fan spins and stops two times and then the machine starts to boot.
2) there was no green/orange light and NO BACKLIGHT until I reconnected some broken lines/pads on the secondary I/O board - that brought back the backlight (???) and the green/orange light
3) if the battery is connected the system will NOT turn on but there is green/orange light - I dare not leave it for longer to take measurements - should I?
4) keyboard and trackpad seem unresponsive
any help with any of the above is appreciated.
and while I was writing this up I made this for Louis - articulated microscope!_=-_-_-_-_-_----> https://www.youtube.com/watch?v=sSAq-OayCrU
thanks guys,
george
so after UC this one it came back to life but:
1) the fan spins and stops two times and then the machine starts to boot.
2) there was no green/orange light and NO BACKLIGHT until I reconnected some broken lines/pads on the secondary I/O board - that brought back the backlight (???) and the green/orange light
3) if the battery is connected the system will NOT turn on but there is green/orange light - I dare not leave it for longer to take measurements - should I?
4) keyboard and trackpad seem unresponsive
any help with any of the above is appreciated.
and while I was writing this up I made this for Louis - articulated microscope!_=-_-_-_-_-_----> https://www.youtube.com/watch?v=sSAq-OayCrU
thanks guys,
george
Last edited: