820-3662 Detects USB 3.0 Devices Only, Doesn't Detect USB 2.0 HDD

rany

New member
820-3662 Q8020 was blown and I replaced it at the request of the customer (another shop), and did nothing else to solve the possible cause. After some time, may be a month, customer reported that it's not detecting USB 2.0 devices.
I tried it and it does detect mice, but not USB 2.0 HDDs. Even from a bootable system. Is this common? Anything I should jump to? Otherwise where to start troubleshooting?
Thanks!
 

dukefawks

Administrator
Q8020 supplies the PCH with the voltage for the USB system. I bet it's dead or power does not get to the PCH. Check power on C1706, but I'm afraid PCH is dead.
Also the prediction of this machine returning with issues came true......Are they expecting a warranty repair?
 

rany

New member
3V3 is present on C1706.
Repair was made back then "as is" without warranty just because they requested this particular part to be replaced. I did not " repair" the board and I told them I expect it to fail again.
 

rany

New member
I gave it back as is. Will not work on it as they convinced the end customer to keep it as is :)
 
Top