829-3437 not power up

Glenn

New member
Have a 820-3437 logic board that won't power up.
have orange light on magsafe.

ppbus_g3h only give 4,35V
Q7130 pin2 16,58

u7100

1 ) 0v
2 ) 16,26v
3 ) 4.41v
9 ) 0,036v
12 ) 3.39v
13 ) 3.39v
14 ) 3.36v
17) 4.12v
18) 4.12v
15 ) 0.028v
19 ) 5.158v
20 ) 5.163v
26 ) 16.35v
27) 16.59v
28) 16.59v

have no history on it
 

dukefawks

Administrator
If R7105 was bad U7100 will be dead too. Also R7105 will probably be dead again if you did not change U7100.
 

Glenn

New member
Yes it was a hole in r7105 and it was waiving someting around 90 ohm



r7105 still gives 20.40 ohm so i tray to replace u7100 again
 
Top