hgoncalves
Active member
Hi,
I have an A2289 820-01987 with no power.
I has only 5V on ampmeter, and tries to boot (reaches 0.13A), but them goes to 0A and loops.
It isen't recognized in DFU mode, and I can't see any component damaged.
PP1V8_SLPS2R seams to be shorted:
0.002 on diode reading, and 0.7ohm to ground.
CC1/2 seams OK on diode readings, and no other components arround CDs´3217 seams to be shorted.
Where shall I start?
I have an A2289 820-01987 with no power.
I has only 5V on ampmeter, and tries to boot (reaches 0.13A), but them goes to 0A and loops.
It isen't recognized in DFU mode, and I can't see any component damaged.
PP1V8_SLPS2R seams to be shorted:
0.002 on diode reading, and 0.7ohm to ground.
CC1/2 seams OK on diode readings, and no other components arround CDs´3217 seams to be shorted.
Where shall I start?
Last edited:
