I have to recover data from laptop that had heavy liquid damage and the PCB beneath the battery connector cable had burnt few layers deep i menaged to drill out damaged part of PCB and get rid of the short but in procces 5 or 6 lines were cut 2 -3 layers deep and are impossable to solder together, i need PCB layer by layer view to connect cut traces.
-
For $29/mo, we provide access to advanced level technicians who will answer your questions on any Macbook board related matter to the best of their knowledge promptly & walk you through how to solve your problem so you can deliver a working board to your customer.Subscribe Now
A2442 820-02098 view board layers needed
- Thread starter Dimitrije
- Start date
Such layers boardview is not available.
You can check continuity for some traces which supposedly pass through that area.
You can check continuity for some traces which supposedly pass through that area.
Unlock what?
Test if it is recognized in Target Disk mode by other Mac.
A thunderbolt cable may be needed.
Test if it is recognized in Target Disk mode by other Mac.
A thunderbolt cable may be needed.